NW Audio is in the business of constructing custom fabricated speaker boxes and installing them with excellence! Whether your project calls for designing and building a box, custom fabrication, or great professional installation services, we are committed to integrity and trust. Exceeding our client’s expectations is our passion, and our list of satisfied customers continues to grow. We look forward to the coming years as we continue to grow throughout Platte city and St. Joseph, MO.
With NW Audio, you’ll get a professional car audio engineer you can trust and results you can hear.
Call for a Quote
Platte City: (816) 858-2303
Saint Joseph: (816) 279-6100
.png "YellowVette(6)")
August 11th, 2010 at 12:17 am
I was wondering if you can install an AUX jack or ipod connector in my 2005 Honda Odyssey. I also have a jam in my cd player. Can you help?
Thanks. You may contact me by email.
August 20th, 2010 at 9:44 pm
Cost for a tinit job on a tint job on a 2005 Altima?
August 21st, 2010 at 2:21 pm
Hello John
You will have to contact the store directly for quotes.
August 25th, 2010 at 3:25 am
Hey i recently bought some RF Power T152 and RF Power T1652 speakers and i was wondering how much big of an amp i would have to get. And how big of a battery would have how to get to power them, i dont believe my battery could handle another amp.
August 25th, 2010 at 3:27 am
Lol how big of an amp
August 30th, 2010 at 2:21 am
do you guy put radios in truck that have been bought from some where else
August 30th, 2010 at 1:53 pm
Yes we would be glad to. The labor could be a tad more due to the different brand. Just contact us for a scheduled time for installation.
Thanks!
October 31st, 2010 at 12:58 pm
I have 2 MTX TR7512 and i want to put them in a vented enclosure that can fit in a 09 cobalt. im going to power it by 1500 watt audiopipe amp. i also need an double din indash put in. do you think you guys can help me? a lot of people are expensive down here.
November 1st, 2010 at 8:04 pm
Hello Raymond,
You will have to contact the store directly for quotes.
Thanks
November 10th, 2010 at 3:57 pm
hey guys, i’m looking into a remote start system for my ’02 saturn sc2. i do not have keyless entry currently. is that going to be a problem? and would u install a system purchased elsewhere?
November 11th, 2010 at 2:18 pm
Hello Michelle,
You will have to contact the store directly, but I’m pretty sure they will install a system purchased elsewhere.
Thanks
November 18th, 2010 at 11:31 pm
Hey i have run into a problem with my crunch gp2500 amp. So i opened it up and found a couple capacitors popped. i know how to replace them, however, i need to get to the other side of the board. as you probably know, in order to do this, i have to remove about 11 clips along the sides covering the (mosfets?). but i don’t know how to remove them. is there some sort of special tool that i should use? or should it just be sliding out with no problem?
Thanks,
Nick
January 31st, 2011 at 12:36 am
i believe so. check on pac”s website to get exactly what you want the model to do. it will also give some restrictions of what specific units it will work with. and a jam in a factory cd player can be tricky. we will have to take it slow trying to help that problem
January 31st, 2011 at 12:39 am
winter special would be $150.00 with any % of tint and extra if a brow is needed.
January 31st, 2011 at 12:41 am
pretty much any power series rockford amp will would work aslong as its gained amd tuned correctly and profesionsally
January 31st, 2011 at 12:43 am
when unsodered a flat screw driver should pop it right up becareful of the white stuff under it its way messy
January 31st, 2011 at 12:45 am
yes no prob
January 31st, 2011 at 12:48 am
no prob we can get you a pre fab box or a custom designed box and hand built by us also, sure on a double din install also
January 31st, 2011 at 12:57 am
no prob we have a special on a remote start and keyless entry for $99.99 and a 2 hr labor charge of $100 so if you have electric locks you will have keyless entry then. if you need the actuators installed they are $80 for it and install per door. we will do others sold items yes
March 27th, 2011 at 11:39 pm
Hey guys, how much would a nice multichannel amp cost? Any recommendations?
April 16th, 2011 at 6:08 pm
Do you guys do or know anyone who installs wood dash kits?
April 26th, 2011 at 6:37 am
Whats up fellas? how much for purchase and instalation for door pops on a 96 grand prix?
August 11th, 2011 at 3:55 pm
Do you guys install led lights?